TWO-COMPONENT FOAM

HANDI-FOAM® Two-Component Foam is a chemically cured foam system. Two-component foam systems consist of an “A” component and a “B” component. These two components mix in the nozzle of the dispensing unit, and the resulting foam cures much more quickly than one-component foams.

The foam will cure to a semi-rigid closed cell foam upon the chemical reaction of component A (polymeric isocyanate) with component B (a polyol blend containing certain additives) and carries an R-Value of 6 to 7 per inch (.02 w/m.k). HANDI-FOAM® Two-Component Foam is tack free in less than 60 seconds and cures completely in 2-5 minutes. Cured foam can be trimmed, sanded and/or painted.

Spray foam onto clean, dry surface in any direction to insulate, fill
and seal various size voids, deaden sound or reduce vibration.

To learn more about Two-Component Foam click HERE

ONE-COMPONENT FOAM

HANDI-FOAM® One-Component Foam is a UL classified sealant. It can be used to economically insulate, seal, bond, fill and stop air infiltration. One-Component foams cure when moisture in the air reacts with the chemistry of the foam.

HANDI-FOAM® One-Component Foam is tack-free in less than 10 minutes and cures within 24 hours. It cures to in-place densities between 1.0 and 1.5 lb. per cubic foot (16 - 24 kg per cubic meter) and carries an R-value of 4 to 5 per inch (.03 w/m.k). Cured foam can be trimmed, sanded and/or painted

Used for filling and sealing joints, insulating, and filling in
wall gaps and cavities, etc.

To learn more about One-Component Foam click HERE

FOAM CLEANER

HANDI-FOAM® Polyurethane Cleaner is a spray solvent used to dissolve uncured foam. It can also be attached to any of the one-component dispensing units, allowing the unit to be flushed and kept clean and operable.

To learn more about Foam Cleaner click HERE



If you wish to inquire about prices for any of the above products, please CONTACT US and we will fax or email the information, as well as answer any questions you may have.